Introdução

This guide details the steps to take off the button pad of your Inter-tel IP 8660.

Peças

Não são necessárias peças.

  1. Before disassembling the phone, make sure it is not plugged into power and the handset phone cord is disconnected from the handset jack.
    • Before disassembling the phone, make sure it is not plugged into power and the handset phone cord is disconnected from the handset jack.

    Adicionar comentário

  2. Unscrew the 9 highlighted screws using a #1 Phillips head screwdriver. You can use a magnetized screwdriver to draw them out.
    • Unscrew the 9 highlighted screws using a #1 Phillips head screwdriver. You can use a magnetized screwdriver to draw them out.

      • 8 mm long

      • 11 mm long

    Adicionar comentário

    • Lift up the back cover and set it aside.

    Adicionar comentário

    • While holding down the motherboard, gently pull the wire harness connecting the speaker to the motherboard until it comes free.

    Adicionar comentário

    • Lift up the speaker.

    Adicionar comentário

    • Lift up the motherboard and set aside

    Adicionar comentário

    • Peel off all rubber button covers.

    Adicionar comentário

    • Remove all plastic buttons. (Note: Look at the initial picture for locations of each button set)

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Juan David GutierrezFranco

Member since: 20-01-2012

67 reputação

4 Guides authored

Equipe

Cal Poly, Team 11-24, Maness Winter 2012 Membro de Cal Poly, Team 11-24, Maness Winter 2012

CPSU-MANESS-W12S11G24

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 673