Introdução

Intempo Wireless Speaker is a battery-powered inductive speaker that amplifies audio simply by placing the smartphone on top of it, without the need for WiFi, Bluetooth or any form of wired connection. However, the speaker tends to work intermittently with age as it slowly loses its functionality. Hence, we will be documenting the process of disassembling the “Intempo Wireless Speaker.” The circuit board is a crucial component that keeps the Wireless Speaker functional, and we believe a lot of users will find it beneficial if they are able to disassemble the product to access the circuit board without damaging any parts of the speaker, given the help of our teardown experience.

Squeeze latch, tilt and remove battery cover to retrieve the batteries.
  • Squeeze latch, tilt and remove battery cover to retrieve the batteries.

Adicionar comentário

Pry the top 2 pads to reveal screws using a flat head screwdriver. Pry the top 2 pads to reveal screws using a flat head screwdriver.
  • Pry the top 2 pads to reveal screws using a flat head screwdriver.

Adicionar comentário

Unscrew the 5 screws (9 effective threads each) using Phillips 0 head screwdriver. Unscrew the 5 screws (9 effective threads each) using Phillips 0 head screwdriver. Unscrew the 5 screws (9 effective threads each) using Phillips 0 head screwdriver.
  • Unscrew the 5 screws (9 effective threads each) using Phillips 0 head screwdriver.

Adicionar comentário

Pry up the battery case from the main part using flat head screwdriver.
  • Pry up the battery case from the main part using flat head screwdriver.

  • Be careful not to damage the sides of the speaker when prying with the screwdriver.

Adicionar comentário

Unscrew the 3 screws (with 9 effective threads each) using Phillips 1 head screwdriver. Lift the circuit board out from the main part. Lift the circuit board out from the main part.
  • Unscrew the 3 screws (with 9 effective threads each) using Phillips 1 head screwdriver.

  • Lift the circuit board out from the main part.

Adicionar comentário

Loosen the glue holding the speaker on the case using the Lever Prybar. Slide the speaker upwards to detach them. Prying the speaker from the case might cause aesthetic damage.
  • Loosen the glue holding the speaker on the case using the Lever Prybar.

  • Slide the speaker upwards to detach them.

  • Prying the speaker from the case might cause aesthetic damage.

  • Be careful not to break the connections of the speaker wires.

Adicionar comentário

Linha de Chegada

Uma outra pessoa concluiu este guia.

Jia'en Ngieng

Member since: 07-03-2018

160 reputação

Autoria de 1 guia

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 3

Todo: 37