Ir para o conteúdo principal

Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement

O que você precisa

  1. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement, Bluetooth Button: passo 1, imagem 1 %32
    • Remove the rubber sleeve.

  2. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 2, imagem 1 %32 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 2, imagem 2 %32
    • Remove 4 screws from the green, plastic button cover.

  3. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 3, imagem 1 %32 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 3, imagem 2 %32
    • After successfully removing the plastic cover, use a sauter against the bluetooth button. The heat will make the removal of the button easy.

    • Place the new bluetooth button in the place of the old bluetooth button and mend the button into place using heat.

  4. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 5, imagem 1 %32 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 5, imagem 2 %32 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 5, imagem 3 %32
    • Screw the 4 screws of the plastic button cover back onto the device.

  5. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: passo 6, imagem 1 %32
    • Put the plastic sleeve back onto the speaker.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Erin Steele

Membro desde: 03/08/17

649 Reputação

Autoria de 5 guias

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 57