Ir para o conteúdo principal

Insignia NS-HD01A Battery Replacement

O que você precisa

  1. Insignia NS-HD01A Battery Replacement, Battery: passo 1, imagem 1 %32
    • Remove the rubber screw caps using the pointed tip of the Spudger.

  2. Insignia NS-HD01A Battery Replacement: passo 2, imagem 1 %32
    • Remove the four 6.0 mm Phillips screws located below the rubber caps using the PH00 bit installed in the driver.

  3. Insignia NS-HD01A Battery Replacement: passo 3, imagem 1 %32 Insignia NS-HD01A Battery Replacement: passo 3, imagem 2 %32
    • Use the plastic opening tool to pry open the back cover.

    • Slide the tool around the sides of the radio to gradually pry the back cover off. Do not remove the cover completely as there is still a cable connecting it to radio.

  4. Insignia NS-HD01A Battery Replacement: passo 4, imagem 1 %32 Insignia NS-HD01A Battery Replacement: passo 4, imagem 2 %32 Insignia NS-HD01A Battery Replacement: passo 4, imagem 3 %32
    Ferramenta utilizada nesse passo:
    Tweezers
    $4.99
    Comprar
    • Use the blunt tweezers to unplug the battery cable from the PCB board. Grab the battery cable plug from the sides.

  5. Insignia NS-HD01A Battery Replacement: passo 5, imagem 1 %32 Insignia NS-HD01A Battery Replacement: passo 5, imagem 2 %32
    • Use the flat side of the Spudger to pry the battery out of the back cover.

    • Insert the replacement battery into the back cover.

    • Reassemble the radio, making sure to reconnect the battery cable.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Joel Najmon

Membro desde: 10/08/16

152 Reputação

Autoria de 1 guia

Equipe

IUPUI, Team 2-2, Wilson Fall 2016 Membro de IUPUI, Team 2-2, Wilson Fall 2016

IUPUI-WILSON-F16S2G2

Membros da 5

1 Guia de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 8

Últimos 30 dias: 18

Duração total: 1,035