Introdução

This guide will take you through the process of replacing a broken or unusable screen.

Peças

Não são necessárias peças.

  1. Place the TV on a surface so that the screen is facing down and you have access to the back.
    • Place the TV on a surface so that the screen is facing down and you have access to the back.

    Adicionar comentário

  2. Flip the TV upside down so that you have access to the TV base.
    • Flip the TV upside down so that you have access to the TV base.

    • Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base.

    • Remove the base from the frame.

    Adicionar comentário

    • Flip the TV back so that the screen is face down

    • Use the Phillips 00 Screwdriver to remove all the Phillips Head Screws from the the backside of the TV.

    Adicionar comentário

    • Flip the TV so that the top of the TV is on your flat surface.

    • Gently pry apart the front and back of Tv from one another. The two sides of your TV should be easily pulled apart since there are no longer any screws holding it together.

    Adicionar comentário

    • There are wires still keeping the two sides of TV together, so remove all the pieces of tape to detach the wires from sides.

    Adicionar comentário

    • You should now be able to pry apart your TV so that you have a clear view of the inside on both sides.

    Adicionar comentário

    • Remove the tape that is holding the silver rectangular piece from the house.

    Adicionar comentário

    • Using the Phillips 00 Screwdriver, remove the screws that are also holding the silver rectangular piece to the house.

    Adicionar comentário

    • Remove the plastic casing from the glass screen.

    • Then carefully remove metal backing from glass screen and separate the layer of plastic from the glass screen.

    Adicionar comentário

    • Separate plastic screen protector layers from both the backing and glass screen.

    • (second picture provides image of what the plastic screen protectors look like)

    Adicionar comentário

    • Find the display board and unplug white ribbon cord from board.

    • Squeeze both sides of plug to release cord.

    Adicionar comentário

    • Using same screwdriver, unscrew the screws that are on the green display board.

    • Separate the green display board from its metal backing.

    Adicionar comentário

    • All cables connecting screen to frame are now detached. You are now ready to pull apart and separate the screen.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Hannah Berenjfoorosh

Member since: 22-01-2018

436 reputação

3 Guides authored

Equipe

Cal Poly, Team S16-G2, Banghart Winter 2018 Membro de Cal Poly, Team S16-G2, Banghart Winter 2018

CPSU-BANGHART-W18S16G2

4 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 28

Todo: 158