Introdução

How to replace the fuse on Insignia Ice Maker.

Peças

Não são necessárias peças.

  1. Remove the 6 screws along the bottom of the rear casing. Remove the 6 screws along the bottom of the rear casing. Remove the 6 screws along the bottom of the rear casing.
    • Remove the 6 screws along the bottom of the rear casing.

  2. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  3. Remove the plastic cover over the circuit board by pressing the lever on the side. A pry tool may be required. Remove the plastic cover over the circuit board by pressing the lever on the side. A pry tool may be required.
    • Remove the plastic cover over the circuit board by pressing the lever on the side. A pry tool may be required.

  4. Remove the fuse with a plastic pry tool. Remove the fuse with a plastic pry tool. Remove the fuse with a plastic pry tool.
    • Remove the fuse with a plastic pry tool.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Evan Taylor

Member since: 18-01-2018

544 reputação

5 Guides authored

Equipe

Cal Poly, Team S21-G3, Banghart Winter 2018 Membro de Cal Poly, Team S21-G3, Banghart Winter 2018

CPSU-BANGHART-W18S21G3

2 Membros

5 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 57