Conserte seus objetos Comunidade Loja

Insignia Flex 11.6 Speakers Replacement

Introdução

This guide will provide you with step by step instructions on how to replace the speakers inside the device. This replacement should only be required for faulty speakers.

O que você precisa

  1. Insignia Flex 11.6 Speakers Replacement, Power Removal: passo 1, imagem 1 %32 Insignia Flex 11.6 Speakers Replacement, Power Removal: passo 1, imagem 2 %32 Insignia Flex 11.6 Speakers Replacement, Power Removal: passo 1, imagem 3 %32

    • Before working on the device, make sure the device is off and not plugged into any power source for safety reasons. Failure to comply could result in injury.

    • Place the device on a firm surface with the device screen facing down.

    Editar

  2. Insignia Flex 11.6 Speakers Replacement: passo 2, imagem 1 %32 Insignia Flex 11.6 Speakers Replacement: passo 2, imagem 2 %32

    • Remove 2, 6.1 mm Phillips J000 screws from the back of the device.

    • If any screws are stripped, refer to the ifixit guide for how to remove a stripped screw. How to Remove a Stripped Screw

    Editar

  4. Insignia Flex 11.6 Speakers Replacement: passo 3, imagem 1 %32 Insignia Flex 11.6 Speakers Replacement: passo 3, imagem 2 %32 Insignia Flex 11.6 Speakers Replacement: passo 3, imagem 3 %32
    Ferramenta utilizada nesse passo:
    Plastic Cards
    $2.99
    Comprar

    • Using a plastic tool and the plastic card, gently pry off the back cover.

    Editar

  5. Insignia Flex 11.6 Speakers Replacement: passo 4, imagem 1 %32 Insignia Flex 11.6 Speakers Replacement: passo 4, imagem 2 %32 Insignia Flex 11.6 Speakers Replacement: passo 4, imagem 3 %32

    • Using tweezers, remove the electrical connector that connects to the battery to remove the power to the battery.

    Editar

  6. Insignia Flex 11.6 Speakers Replacement, Speakers: passo 5, imagem 1 %32

    • Remove 2 electrical connectors that connects to the speaker using flat tweezers.

    Editar

  7. Insignia Flex 11.6 Speakers Replacement: passo 6, imagem 1 %32 Insignia Flex 11.6 Speakers Replacement: passo 6, imagem 2 %32

    • Remove 2 - 6 mm J000 Phillips screws from each of the speakers.

    • Speakers will pop out at this point.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 4

Duração total: 514