Conserte seus objetos Comunidade Loja

Insignia Flex 11.6 Screen Replacement

Introdução

The steps provided will walk you through the necessary replacement for the screen. Complete the prerequisites before performing these tasks.

O que você precisa

  1. Insignia Flex 11.6 Screen Replacement, Power Removal: passo 1, imagem 1 %32 Insignia Flex 11.6 Screen Replacement, Power Removal: passo 1, imagem 2 %32 Insignia Flex 11.6 Screen Replacement, Power Removal: passo 1, imagem 3 %32

    • Before working on the device, make sure the device is off and not plugged into any power source for safety reasons. Failure to comply could result in injury.

    • Place the device on a firm surface with the device screen facing down.

    Editar

  2. Insignia Flex 11.6 Screen Replacement: passo 2, imagem 1 %32 Insignia Flex 11.6 Screen Replacement: passo 2, imagem 2 %32

    • Remove 2, 6.1 mm Phillips J000 screws from the back of the device.

    • If any screws are stripped, refer to the ifixit guide for how to remove a stripped screw. How to Remove a Stripped Screw

    Editar

  3. Insignia Flex 11.6 Screen Replacement: passo 3, imagem 1 %32 Insignia Flex 11.6 Screen Replacement: passo 3, imagem 2 %32 Insignia Flex 11.6 Screen Replacement: passo 3, imagem 3 %32
    Ferramenta utilizada nesse passo:
    Plastic Cards
    $2.99
    Comprar

    • Using a plastic tool and the plastic card, gently pry off the back cover.

    Editar

  4. Insignia Flex 11.6 Screen Replacement: passo 4, imagem 1 %32 Insignia Flex 11.6 Screen Replacement: passo 4, imagem 2 %32 Insignia Flex 11.6 Screen Replacement: passo 4, imagem 3 %32

    • Using tweezers, remove the electrical connector that connects to the battery to remove the power to the battery.

    Editar

  5. Insignia Flex 11.6 Screen Replacement, Motherboard: passo 5, imagem 1 %32

    • Unplug the 2 speaker's connection from the motherboard.

    Editar

  7. Insignia Flex 11.6 Screen Replacement: passo 6, imagem 1 %32 Insignia Flex 11.6 Screen Replacement: passo 6, imagem 2 %32

    • Peel the yellow tape off from on top of the electrical connectors.

    Editar

  8. Insignia Flex 11.6 Screen Replacement: passo 7, imagem 1 %32 Insignia Flex 11.6 Screen Replacement: passo 7, imagem 2 %32

    • Flip up the black cover pieces to expose the 3 electrical connectors.

    • Remove 3 electrical connectors by gently pulling back on them with some tweezers.

    Editar

  9. Insignia Flex 11.6 Screen Replacement: passo 8, imagem 1 %32 Insignia Flex 11.6 Screen Replacement: passo 8, imagem 2 %32 Insignia Flex 11.6 Screen Replacement: passo 8, imagem 3 %32

    • Unplug the 2 black ground wires from the motherboard by gently prying on them until they unhook from the motherboard.

    • Remove the black camera connector by gently prying on it until it unhooks.

    Editar

  10. Insignia Flex 11.6 Screen Replacement: passo 9, imagem 1 %32 Insignia Flex 11.6 Screen Replacement: passo 9, imagem 2 %32

    • Using tweezers, remove the microphone from the the plastic cover.

    Editar

  11. Insignia Flex 11.6 Screen Replacement: passo 10, imagem 1 %32

    • Remove 5 - 3.4 mm Phillips J000 screws from the motherboard.

    • Motherboard pops out.

    Editar

  12. Insignia Flex 11.6 Screen Replacement, Screen: passo 11, imagem 1 %32 Insignia Flex 11.6 Screen Replacement, Screen: passo 11, imagem 2 %32 Insignia Flex 11.6 Screen Replacement, Screen: passo 11, imagem 3 %32

    • Remove battery by prying off with card.

    Editar

  13. Insignia Flex 11.6 Screen Replacement: passo 12, imagem 1 %32 Insignia Flex 11.6 Screen Replacement: passo 12, imagem 2 %32

    • Peel back the copper color electrical connector with blue opening tool.

    Editar

  14. Insignia Flex 11.6 Screen Replacement: passo 13, imagem 1 %32

    • Remove 12 - 4.15mm J000 Phillips screws from the metal bracket.

    • Bracket will then come off.

    Editar

  15. Insignia Flex 11.6 Screen Replacement: passo 14, imagem 1 %32

    • Remove 1 - 3.4 mm J000 Phillips screw from metal plate bracket.

    Editar

  16. Insignia Flex 11.6 Screen Replacement: passo 15, imagem 1 %32 Insignia Flex 11.6 Screen Replacement: passo 15, imagem 2 %32

    • Remove screen from case by prying with a card.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas executaram este guia.

6 comentários

The Flex 11.6" Model# NS-P11W7100 DOEST HAVE THOSE SCREWS RIGHT THERE!!!!!

Charles Kinnison - Responder

yeah, thats the one I have. its quite a bit different. the speaker wires are soldered, too…

Joshua Francis -

mine doesn’t look like that…

Joshua Francis - Responder

where can i get a new screen to buy?

florence sefaa - Responder

Do you sell the insignia ns-p11w7100 tablet 11.6 inches screen? I need on to fix my broken part.

florence sefaa - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 11

Últimos 30 dias: 29

Duração total: 4,463