Conserte seus objetos Comunidade Loja

Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement

Introdução

Rubber gaskets may wear out over time, preventing the lid from closing/opening properly. This guide will show you how to replace the rubber gasket.

  1. Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement, Rubber Gasket: passo 1, imagem 1 %32

    • Remove lid and place upside down on a flat surface.

    Editar

  3. Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement: passo 2, imagem 1 %32 Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement: passo 2, imagem 2 %32

    • Grab the edge of the clear rubber gasket and slowly peel it off the lid.

    • Continue peeling off the gasket until it is completely detached from the lid.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

Savannah Webb

Membro desde: 01/18/18

657 Reputação

Autoria de 5 guias

Emblemas: 7

+4 outros emblemas

Equipe

Cal Poly, Team S12-G3, Banghart Winter 2018 Membro de Cal Poly, Team S12-G3, Banghart Winter 2018

CPSU-BANGHART-W18S12G3

Membros da 4

Autoria de 5 guias

3 comentários

Am having trouble Turning the lid from Unlock to lock. The pin comes out in the back when I go to turn it from unlock to lock. Can you help me?

pclarkrob3 - Responder

I bought the insignia pressure cooker at a garage sale but, the rubber gasket smells bad. I’ve cleaned the entire cooker but, that gasket stinks like no other

Chuck Smith - Responder

I am having the same problem as the first comment by pclarkrob3 I am having trouble turning the lid from unlock to lock. These are really crappy instructions!!!! I have only used my pressure cooker twice so everything is still new.

Vivian Lang - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 10

Duração total: 1,191