Introdução

Float valves may wear out over time, preventing them from rising or falling correctly. This guide will demonstrate how to replace the float valve.

Remove the lid and place it upside-down on a flat surface.
  • Remove the lid and place it upside-down on a flat surface.

Adicionar comentário

Pinch the rubber gasket on the float valve and pull up.
  • Pinch the rubber gasket on the float valve and pull up.

Adicionar comentário

Pull the rubber gasket off of the metal rod. The valve will fall out of its hole onto the table. It can now be cleaned or replaced.
  • Pull the rubber gasket off of the metal rod.

  • The valve will fall out of its hole onto the table. It can now be cleaned or replaced.

  • You may find it helpful to push up on the float valve from the other side of the lid while you remove the gasket.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Savannah Webb

Member since: 18-01-2018

639 reputação

5 Guides authored

Equipe

Cal Poly, Team S12-G3, Banghart Winter 2018 Membro de Cal Poly, Team S12-G3, Banghart Winter 2018

CPSU-BANGHART-W18S12G3

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 10

Todo: 56