Ir para o conteúdo principal

Insignia 6-Quart Pressure Cooker Circuit Board Replacement

O que você precisa

  1. Insignia 6-Quart Pressure Cooker Circuit Board Replacement, Circuit Board and Power Cord: passo 1, imagem 1 %32
    • Use a Phillips head #2 screwdriver to remove the 6mm screw.

  2. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: passo 2, imagem 1 %32
    • Twist the light grey plastic until the holes align with the blockers.

    • Remove the light grey plastic cover.

  3. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: passo 3, imagem 1 %32
    • Remove the power cord from the slot it is inserted in.

  4. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: passo 4, imagem 1 %32
    • Use a Phillips head #2 screwdriver to remove the 22mm screw connected to the black wire.

  5. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: passo 5, imagem 1 %32
    • Use a Phillips head #2 screwdriver to remove the 8mm screw and it's washer from the red wire.

  6. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: passo 6, imagem 1 %32
    • Use a Phillips head #2 screwdriver to remove the 8mm screw and it's washer from the blue wire.

  7. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: passo 7, imagem 1 %32
    • Pinch the small white component connected to the circuit board.

    • Once pinched, wiggle this component until it is disconnected.

  8. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: passo 8, imagem 1 %32
    • Pinch the red component connected to the circuit board.

    • Once pinched, wiggle this component until it is disconnected.

  9. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: passo 9, imagem 1 %32
    • Wiggle the wide white component until it is removed from the circuit board.

  10. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: passo 10, imagem 1 %32
    • Use a J1 head screwdriver to remove the 8mm screws from both sides of the circuit board.

  11. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: passo 11, imagem 1 %32
    • Use a Phillips head #2 screwdriver to remove both 15mm screws from either side of the circuit board, indicated in the picture.

  12. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: passo 12, imagem 1 %32
    • Position the pressure cooker so that the circuit board is farther from you then the black, red, and blue wire connections.

    • To the right of the board, use a Phillips head #2 screwdriver to remove the 6mm screw.

  13. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: passo 13, imagem 1 %32
    • Use a Phillips head #2 screwdriver to remove the 6mm screw behind and to the right of the circuit board tray.

  14. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: passo 14, imagem 1 %32
    • Remove and replace the circuit board.

Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas executaram este guia.

Savannah Webb

Membro desde: 01/18/18

657 Reputação

Autoria de 5 guias

Equipe

Cal Poly, Team S12-G3, Banghart Winter 2018 Membro de Cal Poly, Team S12-G3, Banghart Winter 2018

CPSU-BANGHART-W18S12G3

Membros da 4

Autoria de 5 guias

8 comentários

Where do you purchase the circuit board

Douglas Koons - Responder

Hi, thanks for the guide. Where could I purchase the circuit board?

Anthea - Responder

Please, Where can I buy the electrical circuit?

Mohammed - Responder

why is my circuit board not fixed to the top like in the diagram

david stanley - Responder

where can I purchase the circuit board

de27@bellsouth.net - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 13

Duração total: 3,140