Peças

Não são necessárias peças.

  1. Flip the device over so the bottom is facing up.
    • Flip the device over so the bottom is facing up.

    • You will know it is the bottom because there will be six silver screws visible.

    Adicionar comentário

  2. Remove the USB converter device by gently pulling it out.
    • Remove the USB converter device by gently pulling it out.

    • Do not pull the converter device out by the cord.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the six silver screws using a small Phillips head screwdriver.

    Adicionar comentário

    • Slide the bottom plastic panel of the shell down so it is free of the end cap and the top panel.

    • Lift panel free of device.

    Adicionar comentário

    • Remove the plastic end cap by sliding it forward, freeing from the rest of the device.

    • You can identify the end cap by noting the label "SuperDisk Drive" above where you would insert a floppy disk.

    Adicionar comentário

    • Slide the metal housing out of the plastic shell.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Caitlin Horwatt

Member since: 11-02-2014

137 reputação

2 Guides authored

Equipe

Ohio State, Team 1-2, Buehl Spring 2014 Membro de Ohio State, Team 1-2, Buehl Spring 2014

OSU-BUEHL-S14S1G2

4 Membros

9 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 3

Todo: 465