IBM ThinkPad T42 Wi-Fi Card Replacement

Introdução

A IMB ThinkPad T42 Wi-Fi card allows the device to connect to a wireless network. If your Wi-Fi card is broken or needs to be replaced this guide will show you how.

O que você precisa

Passo 1 Bottom cover

IBM ThinkPad T42 Wi-Fi Card Replacement, Bottom cover: passo 1, imagem 1 %32

Using a Phillips #0 screwdriver, identify and unscrew the twenty screws located on the underside of the T42.

Editar

Passo 2 Rear screws

IBM ThinkPad T42 Wi-Fi Card Replacement, Rear screws: passo 2, imagem 1 %32

Unscrew the four Phillips screws located on either side of the rear of the T42 (there are two located on each end.)

Editar

leave these four screws alone. No need to remove them.

fredwb - 8 de mar de 2014 Responder

There are tiny numbers showing the lengths of the screws. 1-2-3-4 where 1 is the shortest.

The dark red circles are not very easy to see. How about white ones?

mattikaki - 19 de set de 2015 Responder

Passo 3 Keyboard and Trackpad

IBM ThinkPad T42 Wi-Fi Card Replacement, Keyboard and Trackpad: passo 3, imagem 1 %32

Flip the laptop over and open the screen to access the keyboard and trackpad.
The keyboard and trackpad are connected to the motherboard. Before removing the keyboard and trackpad, disconnect both components from the motherboard, as shown in the following step.
The bezel and keyboard will be loose, be careful.

Editar

Passo 4

Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.
Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

Editar