Introdução

Instructions to take out built in speakers inside the laptop.

Peças

Não são necessárias peças.

Unscrew the 20 Phillips screws on the underside of the T42.
  • Unscrew the 20 Phillips screws on the underside of the T42.

    • For ease of reassembly, keep your screws organized.

Adicionar comentário

Unscrew the 2 Phillips screws on both sides of the T42's rear.
  • Unscrew the 2 Phillips screws on both sides of the T42's rear.

leave these four screws alone. No need to remove them.

fredwb - Responder

Of course you need to remove them you Dingbat! They are the main anchors of the screen hinges, Doh!

wbcam -

There are tiny numbers showing the lengths of the screws. 1-2-3-4 where 1 is the shortest.

The dark red circles are not very easy to see. How about white ones?

mattikaki - Responder

Flip the laptop over and open the screen.
  • Flip the laptop over and open the screen.

    • The bezel and keyboard will be loose, be careful.

Adicionar comentário

Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together. Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.
  • Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

    • Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

Adicionar comentário

The metal bracket will now be free to move, grasp it and remove it from the device. The metal bracket will now be free to move, grasp it and remove it from the device.
  • The metal bracket will now be free to move, grasp it and remove it from the device.

Adicionar comentário

Remove the small rubber piece that is covering the T42's microphone,
  • Remove the small rubber piece that is covering the T42's microphone,

Adicionar comentário

This component is free to move.
  • This component is free to move.

Adicionar comentário

Disconnect its connector and pull it out carefully.
  • Disconnect its connector and pull it out carefully.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Gerald Watanabe

Member since: 14-04-2010

180 reputação

14 Guides authored

Equipe

Cal Poly, Team 29-76, Johann Spring 2010 Membro de Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 Membros

30 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 8

Todo: 4,889