Cancelar

IBM ThinkPad T42 Mini-PCI Port Replacement

Escrito Por: Gerald Watanabe (and 4 other contributors)

Comentários: 3
Favoritos: 1

IBM ThinkPad T42 Mini-PCI Port Replacement

Dificuldade

Moderado

Passos

7

Tempo necessário

15 - 20 minutos

Introdução

The Mini-PCI port can be accessed easily after removing the rear cover

Ferramentas

Comprar estas ferramentas

Phillips #0 Screwdriver

US$6,99

Comprar

Peças

Não são necessárias peças.

Passo 1 Bottom Cover

Unscrew the 20 Phillips screws on the underside of the T42.

Unscrew the 20 Phillips screws on the underside of the T42.
- For ease of reassembly, keep your screws organized.

Passo 2 Rear Screws

Unscrew the 2 Phillips screws on both sides of the T42's rear.

Unscrew the 2 Phillips screws on both sides of the T42's rear.

leave these four screws alone. No need to remove them.

fredwb - 08-03-2014 Responder

Of course you need to remove them you Dingbat! They are the main anchors of the screen hinges, Doh!

wbcam - 27-04-2017

There are tiny numbers showing the lengths of the screws. 1-2-3-4 where 1 is the shortest.

The dark red circles are not very easy to see. How about white ones?

mattikaki - 19-09-2015 Responder

Passo 3 Keyboard/Trackpad Removal

Flip the laptop over and open the screen.

Flip the laptop over and open the screen.
- The bezel and keyboard will be loose, be careful.

Passo 4 Disconnecting Ribbon Cables

Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.
- Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

Passo 5 Port Bracket

Remove the screw affixing the bracket down.

Remove the screw affixing the bracket down.

Passo 6 Bracket Removal

Lift the bracket up and out.

Lift the bracket up and out.

Passo 7 Port Removal

Carefully disconnect it from the motherboard and pull it out of the device.

Carefully disconnect it from the motherboard and pull it out of the device.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor

with 4 other contributors

Gerald Watanabe

Member since: 14-04-2010

180 reputação

14 Guides authored

Equipe

Cal Poly, Team 29-76, Johann Spring 2010 Membro de Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 Membros

30 Guides authored

0 comentários

Adicionar um comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 8

Todo: 3,911