Ir para o conteúdo principal
  1. Heat to melt the adhesive sticker under the back cover.
    • Heat to melt the adhesive sticker under the back cover.

  2. Place the suction cup and pull to open a gap between the back cover and the body.And then insert into the guitar pick and slide to cut the sticker.
    • Place the suction cup and pull to open a gap between the back cover and the body.And then insert into the guitar pick and slide to cut the sticker.

    • Attention: Be careful with the bottom side because there is the battery flex cable.

  3. Remove the back cover.
    • Remove the back cover.

  4. And you can replace with the new back cover.
    • And you can replace with the new back cover.

Conclusão

To reassemble your device, follow these instructions in reverse order.

10 outras pessoas concluíram este guia.

Sophia

Membro desde: 25/03/2014

43.516 Reputação

62 Guias de autoria

Um comentário

Is the nfc sensor in the back plate, because i broke the glass and i can see some antennas through the holes. And i think the exposure killed my nfc.

Yoran - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 13

Duração total: 11,248