Ir para o conteúdo principal

Huawei P8 Battery Replacement

O que você precisa

  1. Huawei P8 Battery Replacement, Huawei P8 Battery Replacement: passo 1, imagem 1 %32 Huawei P8 Battery Replacement, Huawei P8 Battery Replacement: passo 1, imagem 2 %32
    • First switch off your phone.

    • Remove the trays for the SD card and the SIM card.

  2. Huawei P8 Battery Replacement: passo 2, imagem 1 %32
    • Remove the two Torx T2 screws located at the bottom next to the device's Micro USB port.

    • If the screen is cracked you might want to use some tape to protect your eyes from glass shards and get a better grip to open the phone.

    Torx 2 also works :)

    Dennis Meerveld - Responder

    Tried pentalobe drivers but had to get a Torx 2 in the end, possibly some variation across regional models.

    Ben Raphael - Responder

    Pentalobe screws on my p8…

    In the kit,i have only T2…

    joska Horvath - Responder

    T3 works best, T2 doesn’t cling to the screws too well

    Castlevin - Responder

  3. Huawei P8 Battery Replacement: passo 3, imagem 1 %32 Huawei P8 Battery Replacement: passo 3, imagem 2 %32
    • Use an iSclack or a suction handle to separate the display unit from the rear panel.

  4. Huawei P8 Battery Replacement: passo 4, imagem 1 %32
    • Remove the two Phillips #00 screws that secure the front camera and display/battery connector brackets

  5. Huawei P8 Battery Replacement: passo 5, imagem 1 %32 Huawei P8 Battery Replacement: passo 5, imagem 2 %32 Huawei P8 Battery Replacement: passo 5, imagem 3 %32
    • Use a tweezer to remove the bracket covering the display and the battery flex connector.

    • Unplug the battery flex connector with a Spudger.

    • Remove the bracket covering the flex connector of the front camera.

  6. Huawei P8 Battery Replacement: passo 6, imagem 1 %32 Huawei P8 Battery Replacement: passo 6, imagem 2 %32 Huawei P8 Battery Replacement: passo 6, imagem 3 %32
    • Unplug the headphone jack and the front camera flex connectors.

    • Remove the front camera.

  7. Huawei P8 Battery Replacement: passo 7, imagem 1 %32 Huawei P8 Battery Replacement: passo 7, imagem 2 %32
    • Use a spudger to disconnect the power/volume cable and fold it out of the way.

    • Remove the liquid contact indicator.

  8. Huawei P8 Battery Replacement: passo 8, imagem 1 %32
    • Remove the five Phillips #00 screws that hold down the motherboard of your Huawei P8.

  9. Huawei P8 Battery Replacement: passo 9, imagem 1 %32 Huawei P8 Battery Replacement: passo 9, imagem 2 %32
    • Unplug the vibration motor flex connector.

    • Disconnect the antenna cable.

  10. Huawei P8 Battery Replacement: passo 10, imagem 1 %32 Huawei P8 Battery Replacement: passo 10, imagem 2 %32 Huawei P8 Battery Replacement: passo 10, imagem 3 %32
    • Unplug the display flex connector from the main board with a Spudger.

    • Disconnect and remove the antenna cable with a tweezer.

  11. Huawei P8 Battery Replacement: passo 11, imagem 1 %32
    • Remove the motherboard from the phone.

  12. Huawei P8 Battery Replacement: passo 12, imagem 1 %32 Huawei P8 Battery Replacement: passo 12, imagem 2 %32
    • Carefully peel up the flex cable of your loudspeaker.

    • If the cable is difficult to peel, heat the loudspeaker assembly with an iOpener or a heat gun.

    • Lift up the loudspeaker assembly with a spudger and remove it.

  13. Huawei P8 Battery Replacement: passo 13, imagem 1 %32 Huawei P8 Battery Replacement: passo 13, imagem 2 %32
    • Free the end of the first adhesive pull tab to get a good grip on it.

    • Pull the adhesive tab in a slow constant movement to free the battery.

  14. Huawei P8 Battery Replacement: passo 14, imagem 1 %32 Huawei P8 Battery Replacement: passo 14, imagem 2 %32
    • Free the end of the second adhesive pull tab.

    • Pull the adhesive tab in a slow constant movement.

    • Should those adhesive tabs snap, you might want to use an iOpener to heat and soften them a little bit so you can pry out the battery with a spudger.

  15. Huawei P8 Battery Replacement: passo 15, imagem 1 %32 Huawei P8 Battery Replacement: passo 15, imagem 2 %32
    Ferramenta utilizada nesse passo:
    Tesa 61395 Tape
    $5.99
    Comprar
Conclusão

To reassemble your device, follow these instructions in reverse order.

18 outras pessoas executaram este guia.

Dominik Schnabelrauch

Membro desde: 11/23/16

201.039 Reputação

Autoria de 682 guias

Equipe

iFixit Membro de iFixit

Staff

Membros da 136

Autoria de 16.561 guias

9 comentários

Really helpful guide. Only hiccup was that on my handset the screws holding the casing together (Step 2) were Torx 2 rather than pentalobe, possibly a regional variation. I opted not to remove the loudspeaker (Step 10) as the ribbon cable was firmly stuck down and I worried it would break. This meant I could only cleanly remove the adhesive pad in line with the charging port. I was able to prise out the battery using spudger and screwdriver to scrape the other pad from the phone body. All now reassembled and working properly!

Ben Raphael - Responder

Overall a very helpful guide . I also had torx screws in mine . The torx screws are tiny , so make sure you have the right screwdriver before starting . We didn’t bother removing the loudspeader assembly either (Step 10) . You can just prise up the ribbon cable (carefully) . Add heat if necessary . Now to the biggest problem . Removing the old battery from the phone . What a nightmare ! It’s really stuck down .We took our time using a hairdryer (no heat gun) , and a flat head screwdriver , and went from one end to the other prising it off gently . It still took about 20 minutes . Saying that . Don’t rush it , as it’s the final stage . Also . If you do use a flat head screwdriver then don’t twist it , as you might damage the casing . Just slide it underneath it applying heat . Total time to remove the old battery was 90 minutes , but about 50 of those were spent just getting the first 2 screws out . 20 minutes to put the new battery in and reassemble . Make sure all flex connectors are properly reseated .

Paul - Responder

My P8 battery has completely died on me. I cannot believe that to replace a battery, we have to now go to these lengths to do it. There must be a mountain of mobile phones, where the only issue with them is a flat battery. Surely, this cannot be allowed to continue. I know why the manufacturers want to make it hard to simply replace a battery, because it sells more mobile phones. But think of all that wasted technology, where a phone may have lasted just over a 24 month contract before the battery is done.

joeninetee - Responder

Many thanks for this tutorial. Together we shall beat them!

joeninetee - Responder

Thank you for a very nice and easy to follow tutorial!

I have now replaced my battery with what should be an original battery for the Huawei Ascend P8, battery nr: HB3447A9EBW. For some reason the width of the new battery is a few millimeters smaller than the old one, meaning that it does not fill out the space completely. Has anyone else experienced the same?

After having assembled the phone again I experience some weird issues with the battery level dropping from 50%, 60%, 70% or even 100% in an instant. I have tried calibrating the battery by, letting it die completely, recharge it to 100% let it drain completely again and recharge. I have tried different battery calibration apps and a factory reset - nothing helps.

I contacted the company I bought the battery from and got a replacement - still same issue.

Unfortunately i damaged the original battery when taking it out, so i cant use that as a reference.

Any suggestions would be most appreciated!

Kris - Responder

Most likely you’ve got a fake battery… :( A telling thing can be if the serial does not match the one you can read from the QR code beside it. Only solution would be to get a genuine one. I can feel your pain.

Bence Szalai -

I have the same issue… I open the back cover and unplug the battery flex connector and then reconnect it again… it is OK for some time but when flex connector is loose again… I grtget the same problem… InIn my case… The battery bracket holding the plug tight is lost and hence connection losen after some time… I smam thing to cut a bracket from a Pepsi Cane…

stahseenjaved -

Great tutorial. Unfortunately the glue stripes were too sticky. Don’t know what Huawei intends to do with such strong stripes. After 30 minutes I could remove them step by step.

Samuel - Responder

after replacing battery phone doesnt switch on only if charger pluged in does it show the hauwie logo then restart same thing again

Dale Olivier - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 12

Últimos 30 dias: 64

Duração total: 39,116