Peças

Não são necessárias peças.

  1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
    • Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

    Adicionar comentário

  2. Turn the computer upside down on a flat surface.
    • Turn the computer upside down on a flat surface.

    Adicionar comentário

    • Firmly slide the release latch to unlock the battery and slide the battery release latch to release the battery.

    Adicionar comentário

    • Lift the battery from the middle and then pivot it outward to remove it from the comp.

    Adicionar comentário

    • Remove the bezel by prying it away from the screen using the spudger.

    Something to keep in mind that this guide doesn't mention: The little “dots” beneath the screen are hiding screws that keep the bezel in place. The dots are simply behind held on by a tape-like adhesive, and shouldn't be too hard to remove. Make sure you remove these screws BEFORE attempting to remove the bezel!

    jerrywester - Responder

    • Remove the four 3mm PH1 Phillips head screws in each corner of the screen and do not care about outer screws.

    Adicionar comentário

    • Remove the screen and place the screen very softly on the keyboard.

    Adicionar comentário

    • Remove the sticker gently and disconnect the metal blade.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Brandon

Member since: 23-03-2018

607 reputação

4 Guides authored

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 16

Todo: 80