How to set up the Newport HT70 - Guia de Reparo iFixit

Introdução

For more information on setting up the ventilator, please refer to page 6-2 in the service manual.

Passo 1 How to set up the Newport HT70

How to set up the Newport HT70, How to set up the Newport HT70: passo 1, imagem 1 %32

Plug the Pinch Release power cable into the power supply input in the bottom left corner of the device.
Ensure that the cord faces to the right of the plug.

Passo 2

How to set up the Newport HT70: passo 2, imagem 1 %32

Continue reference to the diagram, plug the AC power cord into the AC power adapter.
Proceed by plugging the AC power cord into a well-grounded outlet.

Passo 3

How to set up the Newport HT70: passo 3, imagem 1 %32

From here, you may want to connect optional accessories or hook up to a humidifier.
See the Operator’s manual for a more in-depth look at some of the accessory options.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Merek McGill

Membro desde: 04/07/20

520 Reputação

Autoria de 5 guias

+4 outros emblemas

Equipe

Cal Poly, Team S7-G5, Paton Spring 2020 Membro de Cal Poly, Team S7-G5, Paton Spring 2020

CPSU-PATON-S20S7G5

Membros da 3

Autoria de 6 guias

Um comentário

Saludos, tengo una falla con un HT70 PLus… el ventilador no me lee el VT censado por el Sensor de Flujo proximal… quien me puede ayudar?

Ing. José C. Valdéz Mujíca - 15 de dez de 2021 Responder

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Duração total: 228