Introdução

The filter on the Dyson DC14 vacuum needs to be cleaned every six months in order to maintain its peak operating condition.

Ferramentas

Não são necessárias ferramentas.

Peças

  1. The filter is located in the canister of your vacuum.
    • The filter is located in the canister of your vacuum.

    Adicionar comentário

  2. Open the canister filter compartment.  Push the clip upwards, and open the canister top away from you.
    • Open the canister filter compartment. Push the clip upwards, and open the canister top away from you.

    • Remove the yellow filter housing.

    Adicionar comentário

    • Remove the blue sponge-filter from the yellow filter housing.

      • The filter and housing must both be completely dry before reinstalling. Do not use your vacuum without filters installed.

    • Clean the blue sponge-filter in cold water until the water runs clear.

    Adicionar comentário

Conclusão

Once the filter is cleaned, set the blue filter sponge and the yellow filter housing aside for at least 24 hours to dry. Do not use your vacuum without a filter, or when the filter is still wet. To reassemble, follow the steps in reverse order.

8 outras pessoas concluíram este guia.

Donald Percivalle

Member since: 03-10-2012

1.174 reputação

4 Guides authored

Equipe

Cal Poly, Team 3-22, Amido Fall 2012 Membro de Cal Poly, Team 3-22, Amido Fall 2012

CPSU-AMIDO-F12S3G22

4 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 19

Últimos 7 dias: 110

Últimos 30 dias: 554

Todo: 21,900