Introdução

If you drop your huion pen and it starts drawing on its own while hovering, it could mean the inner was pushed in and the pen constantly on. This guide will help you adjust the inner as it supposed to be.

Peças

Não são necessárias peças.

Remove the buttons first. (use a flat screw driver or something similar) (pic 1) Push the black point down and forward to remove the inner.(pic 2) You will get this(pic 3)
  • Remove the buttons first. (use a flat screw driver or something similar) (pic 1)

  • Push the black point down and forward to remove the inner.(pic 2)

  • You will get this(pic 3)

Adicionar comentário

Use a solder to remove the wire (remember which one goes where.) (pic 1) Mark the white plastic and the black one (so you know when to stop when screw it back) (pic 2) Unscrew the white part. Just one or two turns to bring it back to the original position. If you would like to see what's inside, remember which way the spring goes when unscrew the whole thing. It's revrsed in this pic  (pic 3)
  • Use a solder to remove the wire (remember which one goes where.) (pic 1)

  • Mark the white plastic and the black one (so you know when to stop when screw it back) (pic 2)

  • Unscrew the white part. Just one or two turns to bring it back to the original position. If you would like to see what's inside, remember which way the spring goes when unscrew the whole thing. It's revrsed in this pic (pic 3)

Adicionar comentário

Put everything back together. Stop the white plastic at the mark. Put the tip on to see if the spring works (the tip moves freely; turn the white plastic back or forth to get a design pressure sensitivity). Remember to pull the metal up or else the pen won't have power. (pic 2)
  • Put everything back together. Stop the white plastic at the mark. Put the tip on to see if the spring works (the tip moves freely; turn the white plastic back or forth to get a design pressure sensitivity).

  • Remember to pull the metal up or else the pen won't have power. (pic 2)

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

thlong123

Member since: 18-03-2018

97 reputação

Autoria de 1 guia

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 6

Últimos 7 dias: 54

Últimos 30 dias: 170

Todo: 315