Peças

Não são necessárias peças.

Before starting, be sure to remove the battery from the camera. See Removing the Olympus Stylus 760 Battery Guide for details.

Adicionar comentário

Remove the screw located on the right side of the camera

  • Remove the screw located on the right side of the camera


Adicionar comentário

Remove the two screws from the left side of the camera
  • Remove the two screws from the left side of the camera

Adicionar comentário

Use a small prying device to delicately separate the front casing from the back.
New line.
  • Use a small prying device to delicately separate the front casing from the back.
New line.

    • When separating the 2 cases be cautious of the silver band and buttons that located in the middle of the camera. They will come loose.

Adicionar comentário

Remove the 2 screws on the right side of the camera. Remove the 2 screwson the left side of the camera CAUTION! Circuit ribbon is attached at the top left of the camera be careful when separating the front and back of the camera after removing the 4 screws.
  • Remove the 2 screws on the right side of the camera.

  • Remove the 2 screwson the left side of the camera

  • CAUTION! Circuit ribbon is attached at the top left of the camera be careful when separating the front and back of the camera after removing the 4 screws.

Adicionar comentário

Carefully flip up the clip attaching the ribbon from the rear to the front and pull it out

  • Carefully flip up the clip attaching the ribbon from the rear to the front and pull it out


Adicionar comentário

Carefully separate the front and back of the camera

  • Carefully separate the front and back of the camera


Adicionar comentário

You should be left with 4 large pieces, the outer case, inner lens piece, outer silver band and back case containing the LCD display. 

  • You should be left with 4 large pieces, the outer case, inner lens piece, outer silver band and back case containing the LCD display. 


Adicionar comentário

Using a size 0 Phillips head, remove 3 screws holding the ribbon cable that covers the back of the lens.
  • Using a size 0 Phillips head, remove 3 screws holding the ribbon cable that covers the back of the lens.

  • CAUTION: small loose pieces under the back lens cover

Adicionar comentário

Using tweezers remove tiny square lens cases.  There are 4 small pieces.
  • Using tweezers remove tiny square lens cases. There are 4 small pieces.

  • The pieces are relatively small, so becareful that they do not fall inside of the lens.

Adicionar comentário

Remove the larger black rubber frame. Clean with condensed air.
  • Remove the larger black rubber frame. Clean with condensed air.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Derek Guzman

Member since: 10-02-2012

17 reputação

Autoria de 1 guia

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 16

Todo: 1,134