Introdução

If the shutter button of the Canon PowerShot SD780 IS sticks, it could be due to debris or residue inside the camera. This guide will demonstrate how to access the shutter button in order to clean out any unwanted substances.

Peças

Não são necessárias peças.

  1. Make sure to turn off the camera and remove the battery.
    • Make sure to turn off the camera and remove the battery.

    Adicionar comentário

  2. Remove the five outermost Phillips  #00 screws from the camera.
    • Remove the five outermost Phillips #00 screws from the camera.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the front panel of the camera case to expose the top left ribbon cable, and pull the ribbon cable gently to disconnect it from the camera.

    Adicionar comentário

    • Remove the single screw on the far left-hand side of the camera.

    Adicionar comentário

    • Carefully pull the case apart.

    • The case will detach from the camera in two pieces.

    Adicionar comentário

    • Remove the two screws on the metal plate. This will give you access to the spring inside the metal plate for further cleaning.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Arlene Ale

Member since: 13-03-2014

455 reputação

4 Guides authored

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Todo: 471