Introdução

If you have print quality problems, clean the corona wire.

Ferramentas

Não são necessárias ferramentas.

Peças

Não são necessárias peças.

Press the front cover release button.
  • Press the front cover release button.

  • Keep the button pressed and pull the cover toward yourself.

Adicionar comentário

With the front cover in the downward position, the drum & toner unit will be visible.
  • With the front cover in the downward position, the drum & toner unit will be visible.

  • Grab the black-and-yellow handle on the unit. Lift unit up and pull it out of the printer.

Adicionar comentário

  • Clean the corona wire inside the drum unit by gently sliding the blue tab all the way to left and then back to the far right. Repeat several times.

  • Make sure the arrow on the tab lines up with the arrow on the drum unit before you place it back into the printer. If the tab is in the wrong place, a vertical line might appear on future print jobs.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Nathan Ruiz

Member since: 14-01-2010

159 reputação

2 Guides authored

Equipe

Cal Poly, Team 4-14, Forte Winter 2010 Membro de Cal Poly, Team 4-14, Forte Winter 2010

CPSU-FORTE-W10S4G14

5 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 11

Últimos 30 dias: 47

Todo: 11,682