Conserte seus objetos Comunidade Loja

How to clean and maintain your Vape Mod

Introdução

This guide will teach you how to take apart your Vape Mod completely, analyze which parts need to be cleaned, and how to correctly clean them.

O que você precisa

  1. How to clean and maintain your Vape Mod, How to clean and maintain your Vape Mod: passo 1, imagem 1 %32 How to clean and maintain your Vape Mod, How to clean and maintain your Vape Mod: passo 1, imagem 2 %32 How to clean and maintain your Vape Mod, How to clean and maintain your Vape Mod: passo 1, imagem 3 %32

    • Although maintenance for your Vape Mod shouldn't be dangerous, it can be messy. It is recommended to do this on top of a paper towel.

    • Start by removing the top cap of your Vape Mod.

    Editar

  2. How to clean and maintain your Vape Mod: passo 2, imagem 1 %32 How to clean and maintain your Vape Mod: passo 2, imagem 2 %32 How to clean and maintain your Vape Mod: passo 2, imagem 3 %32

    • Unscrew RDA (rebuildable dripping atomizer) and take it off.

    Editar

  3. How to clean and maintain your Vape Mod: passo 3, imagem 1 %32 How to clean and maintain your Vape Mod: passo 3, imagem 2 %32 How to clean and maintain your Vape Mod: passo 3, imagem 3 %32

    • Many Vape Mods are different, you might have to take out your battery in a different way than shown.

    • At the bottom of the tube, unscrew the firing pin.

    • Take the battery out of the Vape Mod.

    Editar

  5. How to clean and maintain your Vape Mod: passo 4, imagem 1 %32 How to clean and maintain your Vape Mod: passo 4, imagem 2 %32 How to clean and maintain your Vape Mod: passo 4, imagem 3 %32

    • Inspect all of the parts that will need to be cleaned:

    • The firing pin

    • The RDA threading

    • The bottom of the inside of the tube

    Editar

  6. How to clean and maintain your Vape Mod: passo 5, imagem 1 %32 How to clean and maintain your Vape Mod: passo 5, imagem 2 %32

    • Clean the Firing pin by dipping a paper towel into hot water.

    • Carefully rotate the hot towel around the middle area, rubbing the grime away.

    Editar

  7. How to clean and maintain your Vape Mod: passo 6, imagem 1 %32 How to clean and maintain your Vape Mod: passo 6, imagem 2 %32 How to clean and maintain your Vape Mod: passo 6, imagem 3 %32

    • Get a new paper towel wet with the hot water.

    • Clean the RDA threading by rotating the wet paper towel back and forth across it.

    Editar

  8. How to clean and maintain your Vape Mod: passo 7, imagem 1 %32 How to clean and maintain your Vape Mod: passo 7, imagem 2 %32 How to clean and maintain your Vape Mod: passo 7, imagem 3 %32

    • Get a new paper towel wet with the hot water.

    • Twist it until it can easily fit inside of the tube.

    • Use your finger or another long tool to rotate the paper towel along the sides and the bottom of the tube.

    Editar

  9. How to clean and maintain your Vape Mod: passo 8, imagem 1 %32 How to clean and maintain your Vape Mod: passo 8, imagem 2 %32 How to clean and maintain your Vape Mod: passo 8, imagem 3 %32

    • Put your Vape Mod back together by doing steps 1 - 2 in reverse. (Leave the mouthpiece of the top cap off).

    • Careful, firing your Vape Mod produces heat and can make the device HOT!

    • Fire your Vape Mod. If the coils are heating up, it has been fixed!

    Editar
Conclusão

If your Vape Mod is still not firing, consider getting a new build.

13 outras pessoas executaram este guia.

Autor(a)

com 3 outros contribuidores

Jessie Smith

Membro desde: 09/29/15

677 Reputação

Autoria de 1 guia

Emblemas: 7

+4 outros emblemas

Equipe

Cal Poly, Team 14-3, Green Fall 2015 Membro de Cal Poly, Team 14-3, Green Fall 2015

CPSU-GREEN-F15S14G3

Membros da 4

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 7

Últimos 30 dias: 32

Duração total: 10,623