How to clean Nikon N2000 (F301) battery corrosion

Escrito Por: Zachary Phillips (and 4 other contributors)

Comentários: 1
Favoritos: 0
Execuções: 3

How to clean Nikon N2000 (F301) battery corrosion

Dificuldade

Fácil

Passos

Tempo necessário

10 minutos

Introdução

Corrosion usually occurs in the battery compartment. It appears as a light blue coating on any metal components and prevents power from flowing in the camera.

Ferramentas

Comprar estas ferramentas

Peças

Não são necessárias peças.

Passo 1 How to clean Nikon N2000 (F301) battery corrosion

In this guide we will be referring to 'left'and 'right' as though the camera's front (the part that says Nikon) facing you.
Use a quarter to twist open the one large screw on the bottom case. (No picture available.)

Editar

Passo 2

Pull up on the tab to remove the batteries.

Pull up on the tab to remove the batteries.
Note: The batteries will probably fall out of their holder.

Editar

Passo 3

Your camera should look something like this.
Clean the marked areas with a cotton swab soaked in CLR or vinegar.

Editar

Passo 4

Corrosion appears as the bluish build-up you see in this picture. Scrub with a cotton swab until it has visibly decreased.

Editar

Reinsert the batteries by following the instructions backwards. If it's still not getting power, head over to our battery compartment replacement guide. Note: It may be tough to find replacement parts.

3 outras pessoas concluíram este guia.