Pular para o conteúdo principal

Introdução

A cracked or dirty cover shield can be the cause of many recording problems for the Sony ECM-MS907 microphone. This guide will go over a short examination of the cover shield.

Peças

Nenhum componente especificado.

  1. Using the Phillips head (#00) screwdriver, remove the two screws at the bottom base of the diaphragm.
    • Using the Phillips head (#00) screwdriver, remove the two screws at the bottom base of the diaphragm.

  2. Separate the top outer cover from the bottom base of the microphone to reveal the cover shield.
    • Separate the top outer cover from the bottom base of the microphone to reveal the cover shield.

  3. PC Laptop Batteries

    An easy fix for a big power boost.

    Comprar agora

    PC Laptop Batteries

    An easy fix for a big power boost.

    Comprar agora
  4. Underneath the top outer cover is the partially welded cover shield, which protects the inner receiver of the microphone from dust. Examine the cover shield thoroughly for any dirt or cracks.
    • Underneath the top outer cover is the partially welded cover shield, which protects the inner receiver of the microphone from dust.

    • Examine the cover shield thoroughly for any dirt or cracks.

  5. Take a quick look at the top of the inner receiver for any excess dirt.
    • Take a quick look at the top of the inner receiver for any excess dirt.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Kefaya

Membro desde: 23-01-2014

343 reputação

3 Guias de autoria

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 9

Todo: 446