How to Repair a Stuck or Broken Chainsaw Rope

Introdução

This is a guide for people looking to fix a stuck or broken chainsaw rope. Chainsaw ropes getting stuck or broken inside a chainsaw is a common problem that occurs when operating a chainsaw. They prevent the chainsaw from starting up and are difficult to fix without instructions.

Some of the steps may vary depending on the type of chainsaw, but this guide provides an accurate solution, regardless of the type of chainsaw. It is also recommended that the user has a good understanding of how to operate a chainsaw before reading this guide to prevent any confusion.

O que você precisa

Passo 1 How to Repair a Stuck or Broken Chainsaw Rope

How to Repair a Stuck or Broken Chainsaw Rope, How to Repair a Stuck or Broken Chainsaw Rope: passo 1, imagem 1 %32

How to Repair a Stuck or Broken Chainsaw Rope, How to Repair a Stuck or Broken Chainsaw Rope: passo 1, imagem 2 %32

Remove the chainsaw casing or handle.
This step will vary depending on what kind of chainsaw you are using. Some might only require you to remove the handle, while others have a casing you must remove instead.

Editar

Passo 2

Remove the screw on top of the housing.

Editar

Passo 3

Remove the housing unit.

Editar

Passo 4

Remove the rope from the chainsaw using a pair of pliers.

Editar

Passo 5

Make your adjustments to fix any problems with the rope.
The adjustments needed to be made will vary depending on your specific problem with the rope.

Editar

Passo 6

Stick the rope back through the insertion hole.

Editar

Passo 7

Stick the housing back onto the casing.
Do not screw the housing on yet.

Editar

Passo 8

Twist the housing unit until the tension is maxed out.
Caution: Once the tension is maxed out, you must hold the housing unit firmly or else it will slide out and possibly hit you or someone nearby.

Editar