Introdução
Use this guide to replace the rear panel in your Whirlpool Refrigerator. Removing the rear panel gives you access to the evaporator fan, coils, and other components.
This guide will work for most Whirlpool refrigerators. This guide is written with a model WRS315SDHW refrigerator. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.
Note: Some photos show the doors removed for clarity purposes. Removing them is not required and will not change the procedure.
O que você precisa
-
-
-
Remove the screw(s) securing the rear panel.
-
Loosen the screw securing the water hose enough for the rear panel to freely move.
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Ask our Answers community for help.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Ask our Answers community for help.
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.
Equipe
Um comentário
How do you remove rear panel on the inside of whirpool french door refrigerator
