Conserte seus objetos Comunidade Loja

How to Reassemble the Palm IIIc

O que você precisa

  1. How to Reassemble the Palm IIIc, How to Reassemble the Palm IIIc: passo 1, imagem 1 %32

    • Reinsert the screen into the case that contains the buttons.

    Editar

  2. How to Reassemble the Palm IIIc: passo 2, imagem 1 %32

    • Put the Motherboard back into casing from right to left.

    • Make sure the black clips are securing the motherboard into the casing.

    Editar

  3. How to Reassemble the Palm IIIc: passo 3, imagem 1 %32 How to Reassemble the Palm IIIc: passo 3, imagem 2 %32 How to Reassemble the Palm IIIc: passo 3, imagem 3 %32

    • Secure the bottom two ZIF connectors into their slots by opening the flap and inserting the ZIF connectors.

    • Gently press down on the flap to secure the ZIF connector. This secures the screen and buttons to the motherboard.

    Editar

  5. How to Reassemble the Palm IIIc: passo 4, imagem 1 %32 How to Reassemble the Palm IIIc: passo 4, imagem 2 %32

    • Connect the blue and red screen cables to the beige box they were removed from.

    Editar

  6. How to Reassemble the Palm IIIc: passo 5, imagem 1 %32 How to Reassemble the Palm IIIc: passo 5, imagem 2 %32

    • Open the ZIF connector box at the top of the motherboard by gently pulling up on the flap.

    • Insert the ZIF tab into the connector box.

    • Gently press down on the flap to secure the ZIF tab in place.

    Editar

  7. How to Reassemble the Palm IIIc: passo 6, imagem 1 %32

    • Attach the white box on the end of the red cable connected to the battery into the connector box on the motherboard.

    Editar

  8. How to Reassemble the Palm IIIc: passo 7, imagem 1 %32

    • Place the front and back covers around the casing containing the motherboard and screen.

    • Before securing the covers, place the sensor in between the front and back cover at the top of the device.

    • After the sensor is in place between the two covers, firmly secure the front and back covers.

    Editar

  9. How to Reassemble the Palm IIIc: passo 8, imagem 1 %32

    • Replace the long screws at the top of the back case with the Philips head screwdriver.

    • Replace the short screws to the bottom of the back case using the Philips head screwdriver.

    • After the screws are in place, insert the stylus.

    Editar

  10. How to Reassemble the Palm IIIc: passo 9, imagem 1 %32

    • Gently snap the flip cover back into place where it connects at the top of the Palm IIIc

    Editar
Linha de Chegada

Uma outra pessoa concluiu este guia.

Autor(a)

com 3 outros contribuidores

Angela Arthur

Membro desde: 02/16/12

101 Reputação

Autoria de 1 guia

Emblemas: 3

Equipe

Ohio State, Team 1-5, Buehl Winter 2012 Membro de Ohio State, Team 1-5, Buehl Winter 2012

OSU-BUEHL-W12S1G5

Membros da 5

1 Guia de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 241