How to Increase HD size of 13" Macbook Air (A1466) - Guia de Reparo iFixit

Participe da comunidade de reparos - Criar conta

Introdução

This guide shows how to increase the hard drive size of the 2013-2017 MacBook Air 13" (A1466), by adding an M2 SSD.

You'll need:

NVME M.2 SSD - I used samsung 970 EVO Plus 250 GB NVME M.2
Sintech Adapter kit e.g. https://mackabler.dk/ngff-m2-pcie-ssd-ko...
Alternatively you may use OWC SSD, which does not require adapter - see https://www.owcdigital.com/products/aura....
However OWC ssds are slower than the newest Samsung SSDs.
Recovery USB disk with OSX - ref https://support.apple.com/en-in/HT201372 I used Catalina.

Passo 1 Backup Machine

First, make a time machine backup of the Mac to an external USB disk.

Passo 2 Recovery Mode

Boot in recovery mode (power + alt) to start from recovery disk.

Passo 3 Format SSD

Then format the new SSD in Disk Utility (erase + first aid).

Passo 4 Shutdown Mac

Shutdown down mac, remove back plate, disconnect battery.

Passo 5 Install SSD

Then install new SSD in M2 enclosure and swap it with old SSD.

Passo 6 Boot Machine

Boot in recovery mode (power + alt) to start from recovery disk.

Passo 7 Mount External USB

Mount external USB disk from (2).

Passo 8 Restore Backup

Finally, restore time machine backup from (2) to new SSD.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 1 outro colaborador

peter lauritzen

Membro desde: 02/27/18

331 Reputação

Autoria de 2 guias

+7 outros emblemas

0Comentários do guia

Visualizações:

Últimas 24 horas: 9

Últimos 7 dias: 61

Últimos 30 dias: 255

Ao todo: 11,133