Ir para o conteúdo principal

Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.

O que você precisa

  1. Este passo não foi traduzido. Ajude a traduzi-lo

    : passo 1, imagem 1 %32 : passo 1, imagem 2 %32
    • Place the frisbee disc on a flat surface with the concave side facing up. Lay a towel down flat over the frisbee.

  2. Este passo não foi traduzido. Ajude a traduzi-lo

    : passo 2, imagem 1 %32
    • Take the bowl and fill halfway full with water. Microwave until water is boiling.

    • The bowl will be hot, so handle it with care.

  3. Este passo não foi traduzido. Ajude a traduzi-lo

    : passo 3, imagem 1 %32
    • Take the bowl with boiling water and place it on top of the frisbee and the towel.

  4. Este passo não foi traduzido. Ajude a traduzi-lo

    : passo 4, imagem 1 %32
    • Add a textbook as a weight to sit on top of the bowl.

    • Let everything sit for 1 hour

  5. Este passo não foi traduzido. Ajude a traduzi-lo

    : passo 5, imagem 1 %32
    • Remove any weights, the bowl, and the towel. Check to see if the disc is still warped.

    • If it is still warped repeat this process one more time.

Linha de Chegada

2 outras pessoas executaram este guia.

Bryce Petersen

Membro desde: 04/09/15

164 Reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 30-5, Green Spring 2015 Membro de Cal Poly, Team 30-5, Green Spring 2015

CPSU-GREEN-S15S30G5

Membros da 5

Autoria de 31 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 13

Últimos 7 dias: 31

Últimos 30 dias: 83

Duração total: 9,556