Ir para o conteúdo principal

How to Clean the Keurig K75 Platinum Brewing System Needle

O que você precisa

  1. How to Clean the Keurig K75 Platinum Brewing System Needle, How to Clean the Keurig K75 Platinum Brewing System Needle: passo 1, imagem 1 %32
    • Before needle repair, make sure the brewer is disconnected from any power outlet.

    • Lift the handle to open the top of the brewer.

    • There are two sharp needles that puncture the K-Cup pack. One is above the K-Cup holder and the other is in the bottom of the holder. Be careful when cleaning the top needle.

  2. How to Clean the Keurig K75 Platinum Brewing System Needle: passo 2, imagem 1 %32
    • Bend a paperclip to create a vertical metal piece. This is used to clean the top needle.

  3. How to Clean the Keurig K75 Platinum Brewing System Needle: passo 3, imagem 1 %32
    • Insert a paper clip into the exit needle to loosen the debris and push it out.

    • Repeat this action until the debris is cleared from the top needle.

    • All external pieces of the brewer are dishwasher safe.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Alexander Vo

Membro desde: 01/11/13

94 Reputação

Autoria de 2 guias

Equipe

Cal Poly, Team 20-2, Maness Winter 2013 Membro de Cal Poly, Team 20-2, Maness Winter 2013

CPSU-MANESS-W13S20G2

Membros da 4

Autoria de 6 guias

9 comentários

must be something else on mine. i have cleaned out with paper clip 3 times and still no water comes out.

jjthdj - Responder

try descaling it

marymckercher -

Worked great for mine just now. I picked up a used B20 Platinum at a Garage Sale yesterday for only $10 super easy to clean needle & now it works great!! Thanks OP!!

ronald944 - Responder

My husband keeps wanting to buy me something new every time the old one doesn't work, well I am old fashioned and will do anything I can to save money. Thank goodness this worked than you so much.

Wendy Clark - Responder

How about the needle at the bottom of the holder?

tahoejb - Responder

Clean that too. It can’t hurt.

LARRY RODAMMER - Responder

I have used filter water ALL WAYS, in my model B 70 I made a cup this AM. I did not need it on any more so shut it down. Or turn off the power switch. Now that not ready light keep blinking. I done every suggestion on, line. Any help. ????????

jrschex - Responder

where can i get a new silicone gasket

Bill Blogna - Responder

Amazon or ebay

marymckercher -

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 26

Duração total: 21,887