Pular para o conteúdo principal
  1. remove the three Phillips screws under the fan closest to the video ports of the card
    • remove the three Phillips screws under the fan closest to the video ports of the card

  2. kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now

    kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now
  3. Lift the fan out(will be attached to a small cord but gets out of the way well)  and shim a small cushion under the center circle, between the aluminum cooling fins and the plastic. I used electric tape, rolling it, sticky side in, to form about a 6 layer small square of tape. It shimmed in nicely.
    • Lift the fan out(will be attached to a small cord but gets out of the way well) and shim a small cushion under the center circle, between the aluminum cooling fins and the plastic. I used electric tape, rolling it, sticky side in, to form about a 6 layer small square of tape. It shimmed in nicely.

  4. Reassemble and re-install the card into your computer. It should stop the vibration.
    • Reassemble and re-install the card into your computer. It should stop the vibration.

Conclusão

To reassemble your device, follow these instructions in reverse order.

8 outras pessoas concluíram este guia.

Matthew Johnson

Membro desde: 07-04-2012

392 reputação

Autoria de 1 guia

Can you post a picture showing how its fit in the fins?

Gustavo Horta - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 13

Todo: 7,375