Conserte seus objetos Comunidade Loja

Hover-1 Matrix Pad Replacement

Introdução

The pads on Hover-1 Matrix are weight sensitive, so when they sense weight, the hover board starts to move automatically. Overused pads must be replaced for the Hover-1 Matrix to move when there is a rider.

O que você precisa

  1. Hover-1 Matrix Pad Replacement, Pad: passo 1, imagem 1 %32 Hover-1 Matrix Pad Replacement, Pad: passo 1, imagem 2 %32

    • Remove the screws on the back of the hoverboard using a Phillips #1 screwdriver.

    • Remove the back shell from the hoverboard.

    Editar

  2. Hover-1 Matrix Pad Replacement: passo 2, imagem 1 %32

    • Remove the screws from the metal layer inside the hoverboard using a Phillips #1 screwdriver.

    Editar

  4. Hover-1 Matrix Pad Replacement: passo 3, imagem 1 %32

    • Separate the upper shell of the hoverboard and the metal layer inside.

    Editar

  5. Hover-1 Matrix Pad Replacement: passo 4, imagem 1 %32 Hover-1 Matrix Pad Replacement: passo 4, imagem 2 %32

    • Start by identifying the motherboard, which is the green pad shown in the picture.

    • Remove the screws on the corners of the motherboard with the Phillips #1 screwdriver and take it off.

    • There are cables attached to the motherboard so go ahead and unattach them.

    Editar

  6. Hover-1 Matrix Pad Replacement: passo 5, imagem 1 %32 Hover-1 Matrix Pad Replacement: passo 5, imagem 2 %32 Hover-1 Matrix Pad Replacement: passo 5, imagem 3 %32

    • Use picture 1 as a guide and move the motherboard to the other side.

    • Identify the two black rubber buttons that are shown in the second picture.

    • Remove the two rubber buttons using the Phillips #1 screwdriver.

    Editar

  7. Hover-1 Matrix Pad Replacement: passo 6, imagem 1 %32

    • Removing the rubber buttons in the previous step allows you to take the pad off.

    • Finally, take off the old pad and put on a new pad.

    Editar
Conclusão

To reassemble your device, follow these instructions starting with step number 6 and finishing with step number 1.

Uma outra pessoa concluiu este guia.

Autor(a)

com 4 outros contribuidores

Jici Zhuang

Membro desde: 10/22/18

362 Reputação

Autoria de 2 guias

Emblemas: 6

+3 outros emblemas

Equipe

UC Davis, Team S7-G2, Lore Fall 2018 Membro de UC Davis, Team S7-G2, Lore Fall 2018

UCD-LORE-F18S7G2

Membros da 3

Autoria de 4 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 16

Duração total: 384