Pular para o conteúdo principal

Introdução

To fully access all parts of the Hover-1 Chrome, the entirety of the outer shell must be removed. This guide will go over how to completely remove the outer shell.

Peças

Nenhum componente especificado.

  1. Flip the Hover-1 Chrome upside down.
    • Flip the Hover-1 Chrome upside down.

    • Use a Phillips #2 screwdriver to remove the fourteen 14 mm screws from the bottom of the Hover-1.

    • Break the two black tape circles, and remove the two 15 mm Phillips screws underneath.

  2. Lift the shell without the speaker grille and unplug the battery.
    • Lift the shell without the speaker grille and unplug the battery.

  3. Lift the shell with the speaker grille. Unplug the speaker.
    • Lift the shell with the speaker grille.

    • Unplug the speaker.

    • Unplug the LEDs.

    • Unplug the power button

    • Unplug the charging port.

  4. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now
  5. Remove the twelve 14 mm Phillips #2 screws holding the top shell on.
    • Remove the twelve 14 mm Phillips #2 screws holding the top shell on.

    • The other six screws are on the side without the battery.

  6. Free the cables held atop the bracket holding the battery in place. Remove the four 14 mm Phillips #2 screws  holding the battery bracket in place. Pull the battery bracket free.
    • Free the cables held atop the bracket holding the battery in place.

    • Remove the four 14 mm Phillips #2 screws holding the battery bracket in place.

    • Pull the battery bracket free.

  7. Unplug the cords for the top LEDs.
    • Unplug the cords for the top LEDs.

    • The other side of the board is structurally symmetrical. However instead of going under the battery bracket, these cords go through a zip tie. These cables must be removed from the zip tie in order to continue.

  8. Turn the board over and pull the top panel off.
    • Turn the board over and pull the top panel off.

Linha de Chegada

Dylan Prins

Membro desde: 08-10-2018

209 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team S4-G1, White Fall 2018 Membro de Cal Poly, Team S4-G1, White Fall 2018

CPSU-WHITE-F18S4G1

4 Membros

6 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Todo: 53