Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Carefully remove the black electrical tape connecting the motherboard to the ribbon wire.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
Ferramenta utilizada nesse passo:Tweezers$4.99-
Squeeze both sides of the protector over the ribbon wire to release it.
-
Use the tweezers to gently remove the ribbon wire from the holder.
-
Repeat steps for all three ribbon wires shown.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Use the #000 Phillips screw driver to remove all three 2.2mm screws attached to the mother board.
-
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.