Ir para o conteúdo principal

Introdução

This guide will walk you through the process of replacing a malfunctioning motherboard in a Hott T725-8G.

  1. Carefully remove the black electrical tape connecting the motherboard to the ribbon wire.
    • Carefully remove the black electrical tape connecting the motherboard to the ribbon wire.

  2. Squeeze both sides of the protector over the ribbon wire to release it. Use the tweezers to gently remove the ribbon wire from the holder. Repeat steps for all three ribbon wires shown.
    • Squeeze both sides of the protector over the ribbon wire to release it.

    • Use the tweezers to gently remove the ribbon wire from the holder.

    • Repeat steps for all three ribbon wires shown.

  3. Use the #000 Phillips screw driver to remove all three 2.2mm screws attached to the mother board. Use the #000 Phillips screw driver to remove all three 2.2mm screws attached to the mother board. Use the #000 Phillips screw driver to remove all three 2.2mm screws attached to the mother board.
    • Use the #000 Phillips screw driver to remove all three 2.2mm screws attached to the mother board.

Conclusão

You are now able to remove the motherboard.

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Jason Dorsey

Membro desde: 20/10/2016

127 Reputação

Autoria de 1 guia

Equipe

UMass Dartmouth, Team 6-2, Martin Fall 2016 Membro de UMass Dartmouth, Team 6-2, Martin Fall 2016

UMASSD-MARTIN-F16S6G2

3 Membros

11 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Duração total: 183