Ir para o conteúdo principal

Introdução

The Hot Wheels AI Intelligent Race System may experience jammed or broken buttons on the controller. Be careful when disassembling the controller as wires can break or circuits can be damaged.

Ferramentas

Peças

Nenhum componente especificado.

  1. Remove the six screws located on the back of the controller using a #J1 JIS head screwdriver.
    • Remove the six screws located on the back of the controller using a #J1 JIS head screwdriver.

  2. Pop the front of the controller casing from the back and carefully lay the controller out with circuits exposed.
    • Pop the front of the controller casing from the back and carefully lay the controller out with circuits exposed.

  3. Locate controller buttons at the top of the controller. They are blue and red. Check for debris that may be jamming buttons or broken buttons. Locate controller buttons at the top of the controller. They are blue and red. Check for debris that may be jamming buttons or broken buttons.
    • Locate controller buttons at the top of the controller. They are blue and red. Check for debris that may be jamming buttons or broken buttons.

  4. If buttons are jammed or broken easily remove them by snapping them up and out of place. Replace buttons with new ones or clear debris and clean buttons. If buttons are jammed or broken easily remove them by snapping them up and out of place. Replace buttons with new ones or clear debris and clean buttons.
    • If buttons are jammed or broken easily remove them by snapping them up and out of place. Replace buttons with new ones or clear debris and clean buttons.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 194