Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Locate the two screws on the back of the car towards the front. Use a #J0 JIS screw to loosen the screws.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Locate the next six screws and use a #J0 JIS Screw to take them off.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove the back-cover off and make sure there are no rust or disconnected wires.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Locate the receiver which is towards the back end of the car.
-
Replace the receiver by disconnecting the wires.
-
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.