Ir para o conteúdo principal

Peças

Nenhum componente especificado.

  1. Locate the two screws on the back of the car towards the front. Use a #J0 JIS screw to loosen the screws. Locate the two screws on the back of the car towards the front. Use a #J0 JIS screw to loosen the screws.
    • Locate the two screws on the back of the car towards the front. Use a #J0 JIS screw to loosen the screws.

  2. Locate the next six screws and use a #J0 JIS Screw to take them off. Locate the next six screws and use a #J0 JIS Screw to take them off.
    • Locate the next six screws and use a #J0 JIS Screw to take them off.

  3. Remove the back-cover off and make sure there are no rust or disconnected wires.
    • Remove the back-cover off and make sure there are no rust or disconnected wires.

  4. Locate the receiver which is towards the back end of the car. Replace the receiver by disconnecting the wires.
    • Locate the receiver which is towards the back end of the car.

    • Replace the receiver by disconnecting the wires.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Um comentário

What size is the motor, so I can order prior to starting the repair? Also, can I slightly upgrade the motor for a faster car?

darsehole - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 7

Duração total: 408