Conserte seus objetos Comunidade Loja

Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement

Introdução

Over time your Hoovers filters will get dirty and may eventually need to be replaced. This guide will show you how to do this in a few easy steps!

  1. Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement, Rinsable Filter: passo 1, imagem 1 %32

    • Put the cleaner into the upright position, turn off the power and unplug the power cord.

    Editar

  3. Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement: passo 2, imagem 1 %32 Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement: passo 2, imagem 2 %32 Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement: passo 2, imagem 3 %32

    • Remove the dirt cup from the cleaner.

    • Twist the top of the dirt cup to open it and reveal the rinsable filter.

    Editar

  4. Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement: passo 3, imagem 1 %32 Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement: passo 3, imagem 2 %32 Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement: passo 3, imagem 3 %32

    • Remove the rinsable filter from the dirt cup.

    • If the rinsable filter is dirty, rinse it with water for 2 minutes or until the water runs clear.

    • Squeeze out excess water and allow to dry for 24 hours.

    • Never put a wet filter back into the cleaner.

    Editar
Linha de Chegada

Autor(a)

com 4 outros contribuidores

Spencer Nefores

Membro desde: 09/26/17

201 Reputação

Autoria de 2 guias

Emblemas: 4

+1 outro emblema

Equipe

Cal Poly, Team S7-G2, Banghart Fall 2017 Membro de Cal Poly, Team S7-G2, Banghart Fall 2017

CPSU-BANGHART-F17S7G2

Membros da 5

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 9

Últimos 30 dias: 18

Duração total: 617