Conserte seus objetos Comunidade Loja

Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement

Introdução

This guide will help assist you with removing and replacing the motor assembly in your Hoover UH72400.

O que você precisa

  1. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, HEPA Filter: passo 1, imagem 1 %32 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, HEPA Filter: passo 1, imagem 2 %32

    • Put the cleaner into the upright position, turn the power off, and unplug the power cord.

    Editar

  2. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: passo 2, imagem 1 %32 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: passo 2, imagem 2 %32 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: passo 2, imagem 3 %32

    • Remove the dirt cup from the cleaner.

    • The HEPA filter is located under the dirt cup and under where it says HEPA.

    • Twist the top counterclockwise to unlock the cap.

    Editar

  4. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: passo 3, imagem 1 %32 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: passo 3, imagem 2 %32

    • Lift the HEPA filter out.

    • Tap the filter against the inside of a trashcan to knock out the dirt and debris or replace as necessary.

    • Do not wash the HEPA Filter.

    Editar

  5. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, Motor Assembly: passo 4, imagem 1 %32 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, Motor Assembly: passo 4, imagem 2 %32 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, Motor Assembly: passo 4, imagem 3 %32

    • Remove the 4 retaining screws and remove the filter tray.

    • Screw lengths are approximately 3/4".

    Editar

  6. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: passo 5, imagem 1 %32

    • Pull the motor housing vertically to dislodge the motor.

    Editar

  7. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: passo 6, imagem 1 %32 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: passo 6, imagem 2 %32 Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: passo 6, imagem 3 %32

    • Use a plastic spudger or opening tool to press on the small circle and wiggle clips free.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Autor(a)

com 3 outros contribuidores

steven hoover

Membro desde: 09/26/17

257 Reputação

Autoria de 2 guias

Emblemas: 6

+3 outros emblemas

Equipe

Cal Poly, Team S7-G2, Banghart Fall 2017 Membro de Cal Poly, Team S7-G2, Banghart Fall 2017

CPSU-BANGHART-F17S7G2

Membros da 5

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 14

Últimos 30 dias: 62

Duração total: 3,891