Introdução

This guide will help you remove the belt the drives the brush.

Peças

Não são necessárias peças.

Place the vacuum on its back.
  • Place the vacuum on its back.

  • On the bottom right side, push the red lever to the left.

  • Remove the plastic cover.

Adicionar comentário

Grab the red switch under the brush and push left.
  • Grab the red switch under the brush and push left.

  • Then remove the plastic base plate.

Adicionar comentário

  • Use a Phillips #1 screwdriver to remove the two screws on the right side of the brush.

Adicionar comentário

  • Remove the two screws on the left side of the brush.

Adicionar comentário

  • Pull the clear plastic away from the head of the vacuum.

  • Slide the belt off the metal rod with your finger.

  • Pull the brush free.

Adicionar comentário

  • Removal of the brush will also remove the belt.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Erik Ingels

Member since: 18-01-2018

193 reputação

2 Guides authored

Equipe

Cal Poly, Team S12-G4, Banghart Winter 2018 Membro de Cal Poly, Team S12-G4, Banghart Winter 2018

CPSU-BANGHART-W18S12G4

5 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 49