Conserte seus objetos Comunidade Loja

Hoover T-Series WindTunnel Pet UH30310 Motor Replacement

Introdução

The motor is the most important part of the vacuum as without it, the vacuum cannot create suction. This is a walkthrough on how to replace the motor.

O que você precisa

  1. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement, Motor: passo 1, imagem 1 %32

    • Depress the hose-release tab.

    Editar

  2. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: passo 2, imagem 1 %32

    • Next, remove the hose from the connector, near the top of the vacuum's rear. This can be achieved by twisting and then pulling down.

    Editar

  3. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: passo 3, imagem 1 %32

    • Use a Phillips #1 screwdriver to remove the two screws on the part holding the hose to the back of the vacuum.

    Editar

  4. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: passo 4, imagem 1 %32

    • Use a Phillips #1 screwdriver to remove the two screws that secure the hose-release tab.

    Editar

  6. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: passo 5, imagem 1 %32

    • Use a Phillips #1 screwdriver to remove the two screws on the top of the vacuum holding the tab on the left of the vacuum.

    Editar

  7. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: passo 6, imagem 1 %32 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: passo 6, imagem 2 %32

    • Use a Phillips #1 screwdriver to remove the two screws on the top of the vacuum head holding down the tab on the right.

    • To remove the tab, slide backwards and then pull up. There is a tab holding the piece down so use force if necessary.

    Editar

  8. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: passo 7, imagem 1 %32 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: passo 7, imagem 2 %32

    • Slide the belt off of the metal rod on the left of the vacuum shaft. Pull the vacuum up and it should easily separate into two pieces.

    Editar

  9. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: passo 8, imagem 1 %32 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: passo 8, imagem 2 %32 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: passo 8, imagem 3 %32

    • Use a Phillips #1 screwdriver to remove the 6 screws on the back and bottom of the vacuum shaft.

    Editar

  10. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: passo 9, imagem 1 %32

    • The top of the motor casing should then fold open, revealing the motor.

    Editar

  11. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: passo 10, imagem 1 %32 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: passo 10, imagem 2 %32

    • The motor can now be accessed for replacement or repair

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Autor(a)

com 2 outros contribuidores

Anthony Garcia

Membro desde: 01/18/18

223 Reputação

Autoria de 1 guia

Emblemas: 5

+2 outros emblemas

Equipe

Cal Poly, Team S12-G4, Banghart Winter 2018 Membro de Cal Poly, Team S12-G4, Banghart Winter 2018

CPSU-BANGHART-W18S12G4

Membros da 5

Autoria de 9 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 7

Duração total: 888