Introdução

Instructions on how to replace the height adjustment wheels at the bottom of the vacuum.

Peças

Não são necessárias peças.

Place the vacuum on its back. Push the red switch to the left.
  • Place the vacuum on its back.

  • Push the red switch to the left.

  • The black cover will then pop out. Remove the cover.

Adicionar comentário

Locate the red switch near the head of the vacuum. Push the switch left. This will pop out the plastic base plate. Remove the plate from the vacuum.
  • Locate the red switch near the head of the vacuum.

  • Push the switch left.

  • This will pop out the plastic base plate. Remove the plate from the vacuum.

Adicionar comentário

Use a Phillips #1 screwdriver to remove the screws from the right side of the white plastic frame. Use a Phillips #1 screwdriver to remove the screws from the right side of the white plastic frame. Use a Phillips #1 screwdriver to remove the screws from the right side of the white plastic frame.
  • Use a Phillips #1 screwdriver to remove the screws from the right side of the white plastic frame.

Adicionar comentário

Remove screws from the left side of the white plastic frame. Remove screws from the left side of the white plastic frame. Remove screws from the left side of the white plastic frame.
  • Remove screws from the left side of the white plastic frame.

Adicionar comentário

Pull the white plastic frame away from the vacuum. Slide the vacuum belt off the metal rod. Pull the brush off the vacuum.
  • Pull the white plastic frame away from the vacuum.

  • Slide the vacuum belt off the metal rod.

  • Pull the brush off the vacuum.

Adicionar comentário

Remove the screws at the bottom of the white frame near the roller. Remove the screws at the bottom of the white frame near the roller.
  • Remove the screws at the bottom of the white frame near the roller.

Adicionar comentário

Pop off the right side of the white frame. Pull down the blue hinge and roller. Pull free the roller from the vacuum.
  • Pop off the right side of the white frame.

  • Pull down the blue hinge and roller.

  • Pull free the roller from the vacuum.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Nathan Yung

Member since: 18-01-2018

241 reputação

2 Guides authored

Equipe

Cal Poly, Team S12-G4, Banghart Winter 2018 Membro de Cal Poly, Team S12-G4, Banghart Winter 2018

CPSU-BANGHART-W18S12G4

5 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 21