Introdução

Use this guide to replace the brush in the head of the vacuum.

Place the vacuum on its back. On the bottom right side, push the red lever to the left.
  • Place the vacuum on its back.

  • On the bottom right side, push the red lever to the left.

  • Remove the plastic cover.

Adicionar comentário

Grab the red switch under the brush and push left. Then remove the plastic base plate. Then remove the plastic base plate.
  • Grab the red switch under the brush and push left.

  • Then remove the plastic base plate.

Adicionar comentário

Use a Phillips #1 screwdriver to remove the two screws on the right side of the brush. Use a Phillips #1 screwdriver to remove the two screws on the right side of the brush. Use a Phillips #1 screwdriver to remove the two screws on the right side of the brush.
  • Use a Phillips #1 screwdriver to remove the two screws on the right side of the brush.

Adicionar comentário

Remove the two screws on the left side of the brush. Remove the two screws on the left side of the brush. Remove the two screws on the left side of the brush.
  • Remove the two screws on the left side of the brush.

Adicionar comentário

Pull the clear plastic away from the head of the vacuum. Slide the belt off the metal rod with your finger. Pull the brush free.
  • Pull the clear plastic away from the head of the vacuum.

  • Slide the belt off the metal rod with your finger.

  • Pull the brush free.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Erik Ingels

Member since: 18-01-2018

193 reputação

2 Guides authored

Equipe

Cal Poly, Team S12-G4, Banghart Winter 2018 Membro de Cal Poly, Team S12-G4, Banghart Winter 2018

CPSU-BANGHART-W18S12G4

5 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 40