Ir para o conteúdo principal

Holmes HEH8031 Safety Weight Replacement

O que você precisa

  1. Holmes HEH8031 Safety Weight Replacement, Housing: passo 1, imagem 1 %32
    • Ensure the device is unplugged from the wall outlet.

  2. Holmes HEH8031 Safety Weight Replacement: passo 2, imagem 1 %32
    • Remove eight 12-mm Phillips #2 screws from the back cover.

  3. Holmes HEH8031 Safety Weight Replacement: passo 3, imagem 1 %32 Holmes HEH8031 Safety Weight Replacement: passo 3, imagem 2 %32
    • Turn heater over so the controls are facing up.

    • Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.

    • Internal wires are connected to both halves of the housing. Be careful when separating the housing.

  4. Holmes HEH8031 Safety Weight Replacement, Circuit Board Removal: passo 4, imagem 1 %32
    • Remove four 12mm Phillips #2 screws from the circuit board.

  5. Holmes HEH8031 Safety Weight Replacement, Safety Weight: passo 5, imagem 1 %32 Holmes HEH8031 Safety Weight Replacement, Safety Weight: passo 5, imagem 2 %32
    • Remove wires from safety weight, as shown.

    • Pull upward on the blue connectors.

    • If connectors are tough to remove, try wiggling while pulling upward.

  6. Holmes HEH8031 Safety Weight Replacement: passo 6, imagem 1 %32
    • Unscrew the Phillips #2 10 mm screw from the safety weight on the rear housing panel.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Deanna Jack

Membro desde: 10/12/16

333 Reputação

Autoria de 4 guias

Equipe

IUPUI, Team 2-1, Baechle Fall 2016 Membro de IUPUI, Team 2-1, Baechle Fall 2016

IUPUI-BAECHLE-F16S2G1

Membros da 4

Autoria de 16 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 5

Duração total: 545