Conserte seus objetos Comunidade Loja

Holmes HEH8031 Power Cord Replacement

Introdução

This guide will show how to safely remove and replace a faulty power cord on the Holmes HEH8031 space heater.

O que você precisa

  1. Holmes HEH8031 Power Cord Replacement, Housing: passo 1, imagem 1 %32

    • Ensure the device is unplugged from the wall outlet.

    Editar

  2. Holmes HEH8031 Power Cord Replacement: passo 2, imagem 1 %32

    • Remove eight 12-mm Phillips #2 screws from the back cover.

    Editar

  4. Holmes HEH8031 Power Cord Replacement: passo 3, imagem 1 %32 Holmes HEH8031 Power Cord Replacement: passo 3, imagem 2 %32

    • Turn heater over so the controls are facing up.

    • Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.

    • Internal wires are connected to both halves of the housing. Be careful when separating the housing.

    Editar

  5. Holmes HEH8031 Power Cord Replacement, Power Cord: passo 4, imagem 1 %32 Holmes HEH8031 Power Cord Replacement, Power Cord: passo 4, imagem 2 %32 Holmes HEH8031 Power Cord Replacement, Power Cord: passo 4, imagem 3 %32

    • Decrimp the wire nuts from both wire connections.

    • Remove wire nuts to expose wire strands.

    • Separate all connected wires.

    Editar

  6. Holmes HEH8031 Power Cord Replacement: passo 5, imagem 1 %32 Holmes HEH8031 Power Cord Replacement: passo 5, imagem 2 %32 Holmes HEH8031 Power Cord Replacement: passo 5, imagem 3 %32

    • Pull on the cord from the outside of the heater with great finesse. At the same time, push the cord clamp out of the housing from the inside.

    • Separate the two halves of the cord clamp and remove from cord.

    Editar

  7. Holmes HEH8031 Power Cord Replacement: passo 6, imagem 1 %32 Holmes HEH8031 Power Cord Replacement: passo 6, imagem 2 %32

    • Prepare the replacement cord by cutting the negative branch (black) at least 8 inches shorter than the positive branch (white).

    • Strip at least 3/4 inch of insulation from the cord to expose bare wire.

    • Twist wire ends to form a tight braid.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

Autor(a)

com 2 outros contribuidores

Deanna Jack

Membro desde: 10/12/16

333 Reputação

Autoria de 4 guias

Emblemas: 13

+10 outros emblemas

Equipe

IUPUI, Team 2-1, Baechle Fall 2016 Membro de IUPUI, Team 2-1, Baechle Fall 2016

IUPUI-BAECHLE-F16S2G1

Membros da 4

Autoria de 16 guias

Um comentário

Are there substitute power cord for Holmes HEH8031 power cord replacement?

Terri Allen - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 11

Duração total: 1,925