Remove the stickers covering the screws. These are located on both corners of the screen. (Two in total) Remove the two 7mm screws.
  • Remove the stickers covering the screws. These are located on both corners of the screen. (Two in total)

  • Remove the two 7mm screws.

Adicionar comentário

Use a plastic opening tool to pull the plastic screen bezel forward. Remove the 4 7mm screws in the corners holding the screen up. Use a plastic oping tool to pry the screen forward. Lay it on the keyboard.
  • Use a plastic opening tool to pull the plastic screen bezel forward.

  • Remove the 4 7mm screws in the corners holding the screen up.

  • Use a plastic oping tool to pry the screen forward. Lay it on the keyboard.

Adicionar comentário

Peel off the tape that connects the chord to the screen. Carefully unplug chord.
  • Peel off the tape that connects the chord to the screen.

  • Carefully unplug chord.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Desiree Mora

Member since: 14-02-2018

265 reputação

3 Guides authored

Equipe

USF Tampa, Team S6-G6, Eyestone Spring 2018 Membro de USF Tampa, Team S6-G6, Eyestone Spring 2018

USFT-EYESTONE-S18S6G6

3 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 3

Todo: 31